FBT VN4000 SYSTEM 2 X VENTIS 112A SPEAKERS & 2 X SUBLINE 118SA SUBWOOFERS  COMES WITH POLES

£4736.00

PACKAGE INCLUDES:

 

2x FBT Ventis 112A

2x FBT Subline 118SA

2x Satellite Speaker Poles

 

 

The VN4000 is the pinnacle of the VN series.

It is built around four boxes: a pair of Ventis 112A and a pair of Subline 118SAs, bundled together with a pair of variable-height connecting poles. This makes for a powerful full-range mobile PA system that also offers the added flexibility to be broken down into smaller setups if that’s what a particular event or situation requires.

 

The Ventis 112A is an extraordinary active speaker featuring a 12"” low frequency woofer and a 1” B&C high frequency compression driver arranged in a vertical configuration. It’s a great sounding, solid box made out of 15mm birch ply finished in a scratch-resistant paint and features a full-face grille. At just 20.6kg, it’s incredibly easy to move around using the integrated handle on the top of the cabinet. It also features a number of M10 suspension points, so it’s perfect for permanent installation, as well as a 35mm top-hat underneath for mounting on the included sub pole or a standalone tripod.

 

Around the back you’ll find the amp module that almost spans the entire width of the cabinet and offers 700W RMS of low frequency amplification and 200W RMS of high frequency. As with the rest of the Ventis range, the LF is Class D while the HF is Class H/AB.

 

Power is delivered by a powerCON TRUE1 connector and an AC loop out is also included so you can daisy-chain the power for another cabinet.

Input-wise, the Ventis 112A offers a single XLR / ¼-inch jack combi socket that can accept both a LINE or MIC level signal and a pair of RCA phono connections to allow, for example, an external MP3 player to be directly connected. Both inputs have a dedicated level control, which means that a mic and background music source can be connected and mixed without the need for a separate mixer. An XLR output socket is also provided to allow the audio signal to loop out to another cabinet.

 

The built-in DSP – accessed via a large backlit LCD display and corresponding turn-and-push control dial – allows you to fine-tune the sound to your own liking. It also allows you to dial-in a delay (0-10 metres), which is very useful for conference work, as well as a Hi-Pass filter. This means that you can either run the box full-range, so it’s useful as a discreet cabinet for wedding ceremonies or speeches, or allow it to concentrate all of its power on the hi/mid frequencies when you have the sub connected.

 

The Subline 115SA active cabinet  is a 15" Sub Woofer .The band-pass design of its predecessor, the 15SA, has been updated to a more traditional bass-reflex configuration, resulting in a smaller and lighter cabinet. Some would argue that a front-firing box like this really needs to be a lot bigger, with chunky drivers, in order to get really low, but that’s certainly not the case with the amazing 118SA.

 

The 118SA is built around 18" woofer with a 3 inch voice coil this  offers a huge amount of punch and high SPL (137 dB )from an incredibly compact design. The amp module offers 1200 W RMS and has a built-in  DSP with eight different pre-sets. You also get an 8-step delay control and a Phase push button.

 

Two XLR input sockets (a stereo pair) are provided alongside corresponding outputs and a push button to activate or bypass the variable High Pass filter. This means that, for smaller gigs, you can run the VN4000 as a 3-box system with your mixer connected to a single sub feeding the two top boxes in stereo.

 

Looks wise, the sub matches the 112A perfectly, with its birch-ply cabinet finished in the same scratch-resistant paint and full-face grille. Two ergonomic handles on the side make it easy to lift and, at just 44.5kg this 18" sub is a true portable design with no comprimise on performance.

 

 

The VN4000 is perfect for conference work, ceremonies, speeches and perfect for DJ or live music events

 

 

FBT Ventis 112A

 

Features:

 

2-way, bi-amplified, bass reflex design

Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF

Digital Signal Processor with graphic display

15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing

High efficiency switch mode power supply

Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push

320mm (12”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT

25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil

Frequency response from 48Hz to 20 kHz

80°H x 50°V Constant Directivity Rotatable Horn

6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat

Speaker stand socket, two aluminium handles

45° monitor taper

Presets:

 

ORIGINAL / LIVE The renowned, smooth FBT sound

VOCAL A special EQ setting to maximise speech intelligibility

DJ Designed to keep the energy high and your audience dancing

TOURING The reliability and the roar of the industry’s most popular touring systems

LOUDNESS The ultimate preset for listening at a medium or low volume

WARM A special setting to emphasise full-bodied, low-mid frequencies.

Specifications:

 

Configuration: 2 way

Built-in amplifier LF/HF: 700/200 W RMS

Built-in amplifier peak LF/HF: 1400/400 W

Frequency response: 42Hz - 20KHz -6dB

Low Frequency woofer: 12 - 2.5 coil inch

High Frequency driver: 1 - 1.4 coil inch

Maximum SPL cont/peak: 126/133 dB

Dispersion: 80° x 50° rotatable HxV

Input impedance: 22 Kohm

AC Power requirements: 640 VA

Input connector: XLR with loop, RCA ST

Power cord: 5/16.4 m/ft

Net Dimension (WxHxD): 387x665x380 / 12.23x26.18x14.96 mm/inch

Net Weight: 20.6/45.41 Kg/lb

 

FBT Subline 118SA

 

Features:

 

Bass-reflex design subwoofer

460 mm (18”) high excursion woofer with 75 mm (3”) voice coil, custom made for FBT by B&C

Frequency response from 33Hz - 100Hz

1200W RMS Class D power amplifier with switch mode power supply

Digital Signal Processor with 6 presets, 4 equalization with 2 LPF Crossover Settings, 6 step digital delay line up to 3.5m

Control Panel with Stereo XLR in/outs, Volume, EQ Presets, Delay, Phase Reversal Switch 0°-180°, 3 status LED indicators

15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing

M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles

Specifications:

 

Configuration: 1 way

Built-in amplifier LF/HF: 1200 W RMS

Built-in amplifier peak LF/HF: 2400 W

Frequency response: 33Hz-100Hz -6dB

Low Frequency woofer: 18 - 3 coil inch

Maximum SPL cont/peak: 134/137 half-space dB

Dispersion: omnidirectional HxV

Input impedance: 22 Kohm

Crossover Frequency: 100Hz KHz

AC Power requirements: 800 VA

Input connector: stereo XLR with loop

Power cord: 7/16.4 m/ft

Net Dimension (WxHxD): 555 x 572 x 666 / 21.8 x 22.5 x 26.2 mm/inch

Net Weight: 44.5/98.1 kg/lb

 

 2019 DSC LTD